Видео

What kind of axels you end up going with

When you put the rear tank cross member back in. What did you use for reference points or measurements to ensure it went back I. The correct spot for the shock and gas tank strap

Does anyone know how much can something like this cost ?

Have an 01. Spent a whole summer welding the spots u missed around the steering box the spot is beside the fuel tank inside frame unless u take the tank out. Evev welded up the trans pan and the front cross pc behind the bumper

I dont know your name, but we have found a bunch of your videos. From not knowing you at all, you seem like a super good guy and (though you are in business) you are looking to gauge lie or scare customers. So you dont need to hear it from me, but good for you.

For Jeep... that plate goes on one side only. When you're done you have to take the center pin out so you can get the clips on the shafts. REMEMBER PLATE ON ONE SIDE ONLY

Do you guys repair the XJ frame also?

Hey Justin and Justina great to see a new video the LJ is awesome a lot of compliments great job see you soon 👍

Hey was this welded with flux core or hardwire?

Man. I really don't want to remove the whole unit. :(

I need your help I am broke my and I need to fix my 2013 gas problem how do I lose the ball lol help me

Thanks this vidéo is answer my question from part 1.

Hi yes seem to be really solid. But how Do you put back the c clip that hold the axle?

Can anyone please tell me what year HVAC module will fit my 2003 ram 2500 cummins? I got a 2006 HVAC module from a wrecking yard. They assured me it will fit

Glad you are back making those videos glad you found a special person in your life. I am definitely interested in having my chassis done on my 2016 GMC Sierra double cab. That chassis you did looked awesome on that 2500. So if you can send me the info on what it would cost and when you get caught up on work I will bring it down. You did the work on my 2003 Silverado and I'm still happy with the way that came out.

I’ve gotta say your a amazing welder that sizzling bacon sound is golden and very consistent

Great video!! Glad to see an upload

Jeep frames great

Do the actuators themselves fail very often ? Is it recommended to replace them along with the doors ?

#LFGoooooo

Just saw your video and I have similar problem on a 2014 ram 3500 ,I have right turn single blinking fast but front and rear light working , also no trailer connector light the hot pin has current I have left turn but that's all Help

Good to see you! Have you seen Everlast 's new Lazer welder it REMOVES RUST LIKT MAGIC.

Now ce to have back Justin,and yes it's been a long while.!!!

Good to have you back Justin. 👍

IDK if there is a follow-up video to this one (my first vid of yours) but I would like to a couple more things... this is just setting the amp gain level with a HU-Amp setup w/ no bass boost [active]. You probably address it later like in your DSP/tuning video but reset the gains on your amps finally AFTER all DSP units (incl. "bass restoration" units) are installed & tuned also... of course with the bass boost knob turned all the way up. That all matters especially if others (especially your "kids") might be driving your vehicle at some point. (for those who don't know) If you set your amp's gain with the bass boost active and set to the dial's midway point, when someone else uses your vehicle and they crank the bass knob (line signal knob) all the way, it COULD blow a sub. I'm a fan of overpowering my subs & other components within reason but have used a 2k amp on a 4watt RMS sub... just have to "gain it down" but that's a whole other video & topic. Sorry, I get excited talking about car audio... for 30 years now, lol. GREAT video, going to check out the channel now :D

Where is it in the 2004?

The video was great except u said in the 03s and 04s they moved it but u never said where to 😮

One of the best videos bro I was so close to scrapping my truck cuz everyone said this and that but you showed me how to check and fix it and it was only 54 bucks with my brother oreily discount

Could you please send us a link to where can purchase the seal

Crap. Clicked on this to learn how to change the liner. Brah

You really know your stuff.

I just bought a welder and safe t caps. No experience welding. What settings do you recommend for a gasless welder? I've got to use a generator for the welder.

Grrrr. I'm angry because you did such a great job on your setup. Grrrr. It looks very nice and that is how I'm planning on doing my setup. Grrrr. Great job and I really like your video. Grrrr.

very nice video. thanks

Jeez. That frame…

Why is mine not showing any voltage or other specs on the screen I don't see any Vmax Vmin Vave Vrms Vpp Fre nothing showing 😢 is mine broke

I've been using their Tig 250P for the last 2-3 years and I have been pleasantly surprised. Hundreds to thousands of pie cuts later, and still no problems. The Cut55DS Pro costs like $450 up here in the frozen wastelands of Alberta Canada, haven't got it (yet).

The yj headlights are rectangular, not square. Awesome video though.

What’s the price range on a job like this 😅

Thanks so much, very informative and a good check popint to buy one of the Jeeps bob

Stupid video

Idid it myself 50 year old lady I couldn't wait for a man. Thank you

But you have to disconnect the ac lines to the evap core and then recharge the ac right? Is it worth going ahead an replacing heater core and evap while you're in there doing blend door?

I’ve got the YesWelder’s cut 65ds pro and I’m having so much fun with it I’ll be doing a long term review video in a few weeks so far I am impressed I’m thinking the tig welder would be nice to try out also

Thank you!!

If my box is made for 43 hz is that the tone i use

Wtf... Why would you leave that front crossmember in? It's already has a giant hole in it. It's literally two bolts and two rivets and you can put a brand new one in. It will take you 10 to 15 minutes. I love when people go this far into a project and start cutting corners at the very end. Complete waste of time.

Placing the exciters in different places on a stereo signal will defeat much of what the original audio engineer was trying to accomplish. If you use different configurations on different panels you should use a mono output and place the panels adjacent to each other. All of the audio will be sent to both speakers and the “EQing" you are doing with exciter placement should have better results. If you retain the original stereo output it would be better to use two exciters per panel (center and 2/5) or a set of the differentiated panels per channel.

I want to thank you so much for this idea. Yes it’s great to have a friend come over but sometimes it’s tough to coordinate that this is a really awesome idea to be able to get your winch on there and be able to get everything taken care of thank you so much again please continue to share these awesome videos.

MAGA 2024 🇺🇸 Peace and Prosperity